Description
| Operating principle | single-stroke piston pump with manual drive | |
| Lubricant | plastic grease up to and including NLGI 2 | |
| Operating temperature | from −25 to +70 °C | from −13 to +158 °F |
| Number of lubricant outlets | 1-8 | |
| Dosing volume per feed stroke | 1.6 cm³ | 0.10 in³ |
| Tank capacity | ||
| HP4 / HPG4 | 0.4 l | 0.1 gallon |
| HP15 / HPG15 | 1.5 l | 0,4 gallons |
| Connection of the main pipeline | for pipeline ø 6 mm, M 10 × 1 | |
| Working pressure | ||
| HP | 250 bar | 3625 psi |
| HPG | 200 bar | 2900 psi |
| Dimensions | ||
| HP | 73 × 140 × 350 mm | 2.87 x 5.15 x 13.78 inches |
| HPG | 107 × 180 × 455 mm | 4.21 x 7.09 x 19.91 inches |
| Installation position | vertical | |
| Part number | Designation | Exit | Working pressure | |
| 604/-25102-1 | HP 4 | 1 | 250 bar | 3625 psi |
| 604/-25103-1 | HP 15 | 8 | 250 bar | 3625 psi |
| 604/-25108-2 | HPG 4 | 8 | 200 bar | 2900 psi |
| 604/-25109-2 | HPG 15 | 8 | 200 bar | 2900 psi |
| 604/-25128-2 | HPG 15-K | 8 | 200 bar | 2900 psi |
The HP pump is supplied with outlet fittings for 6 mm diameter tubing. The HPG pump requires special outlet fittings. Plugs allow the number of outlets to be varied. This allows the lubricant flow to be in increments of 0.2 cm.3; 0.012 inches3.
| Part number | Designation | Pipeline, ∅ [mm] | |
| 504-30344-4 | special outlet fitting | 6 | |
| 504-30345-2 | special outlet fitting | 4 | |
 |
303-17499-3 | plug | — |
