Description
| Operating principle | dosing device | |
| Exits | from 1 to 6 | |
| Dosage volume | 0.02–0.50 cm³ | 0.0012–0.0305 in³ |
| Lubricant | oil grease NLGI 000 – NLGI 1 |
|
| Operating temperature | from −25 to +80 °C | from −13 to +176 °F |
| Working pressure | max 150 bar | max 2180 psi |
| Relief pressure | ||
| B1, B2 | 15 bar | 218 psi |
| B3, B4 | 10 bar | 145 psi |
| B5, B6 | 5 bar | 72 psi |
| Material | zinc-coated steel with passivation | |
| Main pipeline connection (mounting panel) | R 1/4 for ø 8 mm or tube ø 1/2 inch | |
| Output connection | 1/8 NPT(F) for supply lines ø 4 and 6 mm | |
| Lubrication point | solderless pipe connection, DIN 3862 | |
| Dimensions | min. 15 × 90 × 15 mm max. 17 × 110 × 17 mm |
0.6 x 3.5 x 0.6 inches 0.7 x 4.3 x 0.7 inches |
| Installation position | any | |
| Part number | Dispenser B: |
| B1-G1/8-ZN-4 | dosing volume 0.02 cm3, 0.0012 inches3 Lubricant outlet: pipe connection ø 4 mm |
| B1-G1/8-ZN-6 | dosing volume 0.02 cm3, 0.0012 inches3 Lubricant outlet: pipe connection ø 6 mm |
| B1-G1/8-ZN-U | dosing volume 0.02 cm3, 0.0012 inches3 Lubricant outlet: 1/8 NPT female thread |
| B2-G1/8-ZN-4 | dosing volume 0.05 cm3, 0.003 inches3 Lubricant outlet: pipe connection ø 4 mm |
| B2-G1/8-ZN-6 | dosing volume 0.05 cm3, 0.003 inches3 Lubricant outlet: pipe connection ø 6 mm |
| B2-G1/8-ZN-U | dosing volume 0.05 cm3, 0.003 inches3 Lubricant outlet: 1/8 NPT female thread |
| B3-G1/8-ZN-4 | dosing volume 0.1 cm3, 0.0061 inches3 Lubricant outlet: pipe connection ø 4 mm |
| B3-G1/8-ZN-6 | dosing volume 0.1 cm3, 0,0061 inches3 Lubricant outlet: pipe connection ø 6 mm |
| B3-G1/8-ZN-U | dosing volume 0.1 cm3, 0,0061 inches3 Lubricant outlet: 1/8 NPT female thread |
| B4-G1/8-ZN-4 | dosing volume 0.15 cm3, 0.0091 inches3 Lubricant outlet: pipe connection ø 4 mm |
| B4-G1/8-ZN-6 | dosing volume 0.15 cm3, 0.0091 inches3 Lubricant outlet: pipe connection ø 6 mm |
| B4-G1/8-ZN-U | dosing volume 0.15 cm3, 0.0091 inches3 Lubricant outlet: 1/8 NPT female thread |
| B5-G1/8-ZN-4 | dosing volume 0.2 cm3, 0.012 inches3 Lubricant outlet: pipe connection ø 4 mm |
| B5-G1/8-ZN-6 | dosing volume 0.2 cm3, 0.012 inches3 Lubricant outlet: pipe connection ø 6 mm |
| B5-G1/8-ZN-U | dosing volume 0.2 cm3, 0.012 inches3 Lubricant outlet: 1/8 NPT female thread |
| B6-G1/8-ZN-4 | adjustable dosing volume from 0.2 to 0.5 cm³; from 0.012 to 0.03 in³ Lubricant outlet: pipe connection ø 4 mm |
| B6-G1/8-ZN-6 | adjustable dosing volume from 0.2 to 0.5 cm³; from 0.012 to 0.03 in³ Lubricant outlet: pipe connection ø 6 mm |
| B6-G1/8-ZN-U | adjustable dosing volume from 0.2 to 0.5 cm³; from 0.012 to 0.03 in³ Lubricant outlet: 1/8 NPT female thread |
Accessories
 |
For B metering devices, mounting plates with 1–6 outlets (for threaded fittings) with a G 1/8 thread for an O-ring seal are used. The main line fitting is for a G 1/4 ø 8 mm or a ø 1/2 inch pipe. Mounting plates with a normal profile and a profile with openings on opposite sides are available in zinc-plated and passivated steel. |
| Part number | Description |
| BPLD-02-ZN | Mounting plate with 2 outlets (for threaded fittings), zinc-plated and passivated steel |
| BPLD-04-ZN | Mounting plate with 4 outlets (for threaded fittings), zinc-plated and passivated steel |
| BPLD-06-ZN | Mounting plate with 6 outlets (for threaded fittings), zinc-plated and passivated steel |
| BPLD-0202-ZN | Mounting plate with 4 outlets (for threaded fittings), 2 outlets on opposite sides, zinc-plated and passivated steel |
| BPLD-0303-ZN | Mounting plate with 6 outlets (for threaded fittings), 2 outlets on opposite sides, zinc-plated and passivated steel |
