Насос 1810 с ручным приводом

Hand-operated pump 1810

For single-line lubrication systems

The 1810 model features a transparent reservoir with a spring-loaded pressure plate. An indicator pin at the base of the pump indicates when the operating pressure of 172 bar has been reached. (2500 psi). The pump can be filled through the built-in fitting using the 81834 filling pump or other hand pumps equipped with the 645006 fitting.

Technical characteristics and advantages

  • The number of strokes depends on the connected lubrication points and dosage.
  • Reservoir with spring-loaded pressure plate
  • Ease of maintenance
  • An economical and efficient way to distribute lubricants
  • Pump base with integrated check/bleed valve and indicator pin for visual monitoring of maximum or discharge pressure
  • Relieves pressure from the lubrication line when the handle is pulled back to its extreme position
  • Two different filling nozzles are available

Application areas

  • Construction equipment
  • Agriculture
Brochures and manuals
 Single-Line Lubrication Systems Catalog (9.9 MB)
Category:

Description

Technical specifications
Operating principle hand-operated pump
Exits 1
Dosage volume 2.6 cm³/feed stroke 0.16 in³/stroke
Lubricant NLGI 0, 1, 2 plastic grease
Operating temperature from −23 to +65 °C from −10 to +150 °F
Working pressure min. 82 bar
max 240 bar		 min. 1200 psi
max 3500 psi
Tank capacity 2.3 kg 5 pounds
Material acrylic, steel, brass, copper, polyurethane, butadiene acrylonitrile rubber
Output connection 1/4 NPTF (internal thread)
Dimensions 413 x 181 x 197 mm 16.25 x 7.125 x 7.75 inches
Installation position vertical or horizontal
Ordering information
Part number Description
1810 hand-operated pump
81834 filling pump
645006 filling nipple

Related products