Насосный агрегат 40PGA с пневматическим приводом
Насосный агрегат 40PGA с пневматическим приводом - Image 2
Насосный агрегат 40PGA с пневматическим приводом - Image 3
Насосный агрегат 40PGA с пневматическим приводом - Image 4
Насосный агрегат 40PGA с пневматическим приводом - Image 5

40PGA Pneumatic Pump Unit

For single-line lubrication systems

The Model 40PGA is a compact lubrication pump unit. This splash-proof pump is pneumatically driven and can be controlled and monitored using the ST-102 or ST-102P electric remote control. The pump is available with reservoirs of various sizes and materials, each with a spring-loaded intermediate piston. A low-level alarm is available in aluminum and steel. The pump can also be supplied with a built-in pressure switch.

Technical characteristics and advantages

  • Compact air-driven pump for challenging conditions
  • Part of a modular system with the possibility of modification
  • Features of splash-proof pump:
    • Choice of four tanks in different sizes
    • Reservoirs with a spring-loaded intermediate piston
    • Steel and aluminum tanks are equipped with low level alarms.
    • Optional built-in pressure switch
  • Mechanical relief valve
  • Continuously controlled and monitored by remote timer
  • Complies with environmental requirements

Application areas

  • Buses and trucks
  • Heavy-duty vehicles
Brochures and manuals
 Product brochure (205.1 KB)
 Installation instructions (1.1 MB)
Category:

Description

Technical specifications
Operating principle pneumatically driven piston pump
Exits 1
Dosage volume 40 cm³/feed stroke 2.4 in³/stroke
Lubricant NLGI 0, 1, 2 plastic grease
Operating temperature from −30 to +70 °C from −22 to +158 °F
Working pressure max 10 bar max 145 psi
Tank 1.7, 2, 4 and 10 l 3.75, 4.4, 8.8 and 22 pounds
Material (tank) stainless steel, plastic, steel, aluminum
Output connection R 1/4 inch
Operating voltage 24 V
Gear ratio 16:1
Protection class IP 65
Dimensions min. 270 × 320 × 180 mm
max. 570 × 325 × 245 mm		 min. 10.63 x 12.59 x 7.0 in
max 22.44 x 12.79 x 9.65 inches
Installation position vertical and horizontal
Ordering information
Part number Description
40PGA-A-4L-24-PS 40PGA Pump Unit, 4L Aluminum Tank, 24VDC, Built-in Pressure Switch
40PGA-A-10L-24-PS 40PGA Pump Unit, 10L Aluminum Tank, 24VDC, Built-in Pressure Switch
40PGA-P-170-24-PS 40PGA Pump Unit, 1.7L Plastic Tank, 24VDC, Built-in Pressure Switch
40PGA-S-2L-24-PS 40PGA Pump Unit, 2L Stainless Steel Tank, 24VDC, Built-in Pressure Switch

Related products