Насосный агрегат 82676 с пневматическим приводом

Pump unit 82676 with pneumatic drive

For single-line lubrication systems

The Model 82676 is a high-capacity pump designed for remote or high-volume oil filling. It pumps lubricant during the forward stroke using compressed air and relieves pressure in the lubrication line via a built-in check/relief valve through a 1/2 NPTF (F) oil inlet. (Maximum working pressure 5.5 bar) 80 psi)

Technical characteristics and advantages

  • Designed for remote or high-volume oil filling
  • Remote system components are available upon request.

Application areas

  • Metallurgical plants
  • Packaging machines
  • Plastic recycling
  • Loading and unloading equipment
  • Food industry
Brochures and manuals
 Single-Line Lubrication Systems Catalog (9.9 MB)
Category:

Description

Technical specifications
Operating principle pneumatically driven piston pump (single stroke)
Exits 1
Dosage volume 39.3 cm³/stroke 2.4 in³/stroke
Lubricant oil, synthetic oils on request
Operating temperature from −23 to +65 °C from −10 to +150 °F
Working pressure max 70 bar max 1000 psi
Tank remote
Output connection 1/4 NPTF (internal thread)
Pneumatic valve required, 4-way
Gear ratio 20:1
Dimensions 470 × 146 × 533 mm 18.5 x 5.75 x 21 inches
Installation position vertical
Ordering information
Part number Description
82676 High-capacity pump with check/relief valve, 1/2 NPTF oil inlet (internal thread)

Related products