Насос P623S с электрическим приводом

P623S Electric Drive Pump

For single-line lubrication systems

The P623 S electric-driven pumps were designed to withstand electromagnetic pulses (EMPs) from lightning strikes. The P623 S is an updated version of the P603 series pumps and is intended for single-line automatic lubrication systems.

Working closely with customers to develop products tailored to their specific needs, SKF developed the P623 S pump for marine and offshore wind applications. These pumps are also suitable for applications in construction, mining, and renewable energy where lightning protection is required. P623 S pumps are equipped with power supplies that convert 230 V to 24 V (control) with overvoltage protection, allowing for discharge of 8 kV (electrical ground). Pumps are available with a clamping plate for use in rotating applications or with a stirrer for stationary applications.

Technical characteristics and advantages

  • Reduced operational risks compared to standard automatic lubrication systems
  • High safety standards
  • Compliance of the lubrication system with high requirements

Application areas

  • Wind energy systems
  • Construction and mining equipment
  • Renewable energy sources
Brochures and manuals
 Product brochure (187.8 KB)
 Installation instructions (1.6 MB)
Category:

Description

Technical specifications
Operating principle Electric driven piston pump
Lubricant plastic lubricant: up to and including NLGI class 2
Number of lubricant outlets 1
Feed to the pump element 0.22 cm3/feed stroke 0.0134 inches3/feed stroke
Tank capacity 4; 8; 10; 15; 20 l 1.06; 2.11; 2.64; 3.96; 5.28 gallons
Empty pump weight 8; 10; 12; 14; 19 kg 17.64; 22.05; 26.45; 30.86; £41.89
Working pressure max 320 bar 4640 psi
Operating temperature from −25 to +55 °C from −13 to +131 °F
Protection class IP 67
LPZ0 (Lightning Protection Zone) in accordance with the general standard EN61000-6-2 8 kV
Electromagnetic compatibility (EMC) 2014/30/EU
Dimensions
min. 439 x 220 x 278 mm 17.28 x 8.66 x 10.94 inches
Max. 976 x 220 x 278 mm 36.1 x 8.66 x 10.94 inches
Installation position Vertical, i.e. the lubricant reservoir is at the top
The pressure plate version can also be used in rotating conditions
Sample order
The product can be configured using a configuration code. The order template includes the applicable part number and an explanation.
P623S-15XLF-3Z7-AC-H1.H3-BR10-SE
  • Pumps for single-line lubrication systems
  • With a 15L reservoir for plastic grease
  • With pressure plate and empty tank alarm
  • Three Z7 type pump elements are combined inside
  • AC power supply
  • Harting connection H1(X2) and H3 (X4)
  • With control unit
  • With pressure sensor
More detailed information is provided in the product catalogue.

Related products