Насосы ZPU 08/14/24 с электрическим приводом
Насосы ZPU 08/14/24 с электрическим приводом - Image 2
Насосы ZPU 08/14/24 с электрическим приводом - Image 3
Насосы ZPU 08/14/24 с электрическим приводом - Image 4
Насосы ZPU 08/14/24 с электрическим приводом - Image 5

ZPU 08/14/24 pumps with electric drive

For dual-line lubrication systems

ZPU 08/14/24 pumps are used mainly in dual-line systems or as injection pumps and operate with a maximum pressure of 400 bar. (5800 psi). Depending on the system's layout, these electric pumps deliver lubricant up to 120 meters (131 yards) and more. ZPU 08/14/24 pumps are equipped with 40 or 100 l tanks. (10 or 26 gal) and are standardly equipped with a relief valve, a check valve, a lubricant filter, and a pressure gauge. These reliable units operate effectively at temperatures from -20 to +80°C. (from -4 to +176 °F) thanks to the built-in stirring device.

Technical characteristics and advantages

  • High strength
  • Ease of maintenance
  • Three options to increase lubricant supply
  • Ultrasonic sensor for low and high level alarm
  • Built-in lubricant filter

Application areas

  • Cement plants
  • Metallurgical plants
  • Electric power industry
  • Mining
  • Large-sized equipment
Brochures and manuals
 Operating instructions — ZPU ATEX (2.0 MB)
Category:

Description

Technical specifications
Operating principle electrically driven piston pump
Drive speed depending on the model, 60–180 rpm
Operating temperature from −20 to +80 °C from -4 to +176 °F
Lubricant plastic lubricant: up to and including NLGI class 2
NLGI 3 on request
oil: with a viscosity of min. 20 mm2/With
Dosage volume
ZPU 08 8000 cm³/h 488 in³/h
ZPU 14 14,000 cm³/h 855 in³/h
ZPU 24 24,000 cm³/h 1465 in³/h
Working pressure max 400 bar 5800 psi
Voltage 380–415 VAC, 50 Hz
420–480 VAC, 60 Hz
500 V AC, 50 Hz
Protection class IP 65
Connection of the main pipeline internal thread G 3/4
Tank capacity 40 or 100 l 10 or 26 gal.
Dimensions depending on the model
min. 760 x 670 x 410 mm 30 x 26 x 16 inches
Max. 975 x 825 x 500 mm 38.5 x 32.5 x 20 inches
Installation position vertical
Sample order
The product can be configured using a configuration code. The order template includes the applicable part number and an explanation.
ZPU08-G100-XL-500
  • Pump with a flow rate of 8000 cm3/h, 488 inches3/h
  • With flanged motor-reducer IMB5
  • tank 100 l; 26 gal.
  • Grease reservoir with low level monitoring
  • Motor 500 VAC/50 Hz
You can configure your product using the CAD configurator below. This will provide you with a specific order number.

Configure the product, download the CAD file

Related products