Description
The module configuration will be similar to the 600A, which is designed for the most demanding applications, such as processing large quantities of abrasive and heavy material. The robustness of the unit and the power of the reliable ejector make the device ideal for applications where many industrial vacuum cleaners are unsuitable. For example, for collecting abrasives in blasting chambers, sand recovery in foundries, and so on. Your device can be customized to meet your specific requirements. Depending on demand and compressed air availability, different ejectors can be used. The ejector can be mounted on a stationary silo with a filter.
A range of different discharge valves can be fitted to the silo to allow easy discharge of collected material.
When working with large quantities of material, Nederman recommends using a pre-separator before the vacuum unit.
For 600A configuration you can only select the ejectormodule, filtermodule, silomodule and discharge valve outputs listed in this document and with mfc (module for configuration) in the title.
1. Select the ejector module depending on the required vacuum and air flow.
2. Select a filter module depending on the filter capacity.
3. Select a bin.
4. Select the outlet valve.
5. Select cleaning equipment.
Choose how to control your shutter:
1. Electrical control. You will need a NAMUR pneumatic control valve, a solenoid valve recommended for the selected ejector size, and a control unit.
2. Air control - you need a Namur valve.
Nederman does not include an air supply hose to the valve.
Make sure all module requirements are met. The height of your configuration depends on the filter module and legs you choose. .
- Durable and efficient self-cleaning filter
- Very powerful and reliable jet pump as a vacuum producer
- Suitable for heavy and/or abrasive materials
- A control system with many different functions is available as an accessory.
