Насос PTL 201 с пневматическим приводом

PTL 201 pump with pneumatic drive

For small-sized equipment

The PTL 201 pneumatically driven lubrication pump is specifically designed to reduce friction and wear on pneumatically driven equipment in all industries. The PTL 201 is ideal for automated centralized lubrication of equipment where manual lubrication is difficult. It is also a cost-effective replacement for larger pneumatic pumps for equipment with low lubrication requirements. Small lubricant flow rates start at 0.14 cm³/min, and the factory setting is 2.8 cm³/min, which equates to 20 strokes per minute.

The very compact PTL 201 pump is suitable for installation on virtually any type of equipment.

Technical characteristics and advantages

  • Compact design
  • Wide range of operating temperatures
  • The small volume of only 0.14 cm³/min is set by means of a throttle valve
  • Replacement cartridges 150 and 310 g with visual level indicator

Application areas

  • For equipment with pneumatic systems that drive a lubrication pump
Catalogs
 Single-line lubrication systems (9.9 MB)
 Dual-line lubrication systems (4.3 MB)
 Multi-line lubrication systems (3.7 MB)
 Sequential lubrication systems (8.8 MB)
 Circulating oil lubrication systems (6.4 MB)
 Fittings and accessories (9.0 MB)
Category:

Description

Technical specifications
Operating principle Pneumatically driven piston pump
Exits max 1
Dosage volume 0.22 cm³/feed stroke 0.0134 in³/stroke
Max. productivity 20 cm³/min 1.22 in³/min
Operating temperature from −10 to +70 °C from +14 to 158 °F
Working pressure max 27 bar max 392 psi
Pneumatic inlet pressure 4–6 bar 58–87 psi
Min. running-in pressure 2.5 bar 36 psi
Cartridge 150 or 310 g 0.33 or 0.68 pounds
Dimensions including cartridge 183 × 80 × 80 mm 7.2 x 3.15 x 3.15 inches
Installation position vertical

Related products