Насос P603S с электрическим приводом
Насос P603S с электрическим приводом - Image 2
Насос P603S с электрическим приводом - Image 3

P603S electric pump

For single-line lubrication systems

The easy-to-install P 603S pump features a comprehensive design, including a programmable controller, pressure switch/sensor, and discharge valve. Replacing the metering device is simple, as the main line or nearby metering devices do not require dismantling. Replacement can be performed between lubrication cycles, avoiding unnecessary lubricant consumption or costly downtime. An additional pressure switch at the end of the line on larger systems can be used for additional pressure monitoring to ensure proper lubrication.

For use in rotating wind turbines, the reservoir is equipped with a pressure plate and a mixing device, which also simplifies the use of lubricants with severe segregation. For stationary operation, a fixed mixing device is sufficient.

Technical characteristics and advantages

  • Robust design with simple system layout
  • Easy maintenance
  • Easy system scaling
  • SE2 waste lubricant suction devices
  • QSL/SL metering devices suitable for high pressure
  • Suitable for lubricants with severe stratification

Application areas

  • Wind turbines
  • Construction equipment
  • Mining and mineral processing industries
  • Trucks
Brochures and manuals
 Product brochure (2.1 MB)
Category:

Description

Technical specifications
Operating principle electrically driven piston pump
Lubricant plastic lubricant: up to and including NLGI class 2
Number of lubricant outlets 1
Dosage volume 12 cm3/min 0.73 in³/min
Operating temperature from −40 to +70 °C from −40 to +158 °F
Working pressure max 300 bar 4350 psi
Tank capacity 4; 8; 10; 15; 20 kg 9, 18, 22, 33 or 44 pounds
Pump elements 3 (ø 7 mm, 0.27 inches)
Stirring device 18 rpm
Operating voltage 12, 24 VDC; 115, 230 VAC
Current consumption max 2 A
Protection class IP 6K 9K
Connections 12, 24 V DC: bayonet plug; AC: bayonet plug and square plug
Switching the power supply 12, 24 VDC; not applicable for AC: yes
Material cast aluminum alloy, polycarbonate resin
Output connection G1/4
Dimensions min. 240 x 235 x 471 mm
max. 240 × 235 x 949 mm		 min. 9.44 x 9.25 x 18.54 inches
max 9.44 x 9.25 x 37.08 inches
Installation position with a stirring device: the top of the tank should be facing upwards
with pressure plate: any
Ordering information
Part number Designation Operating voltage Tank capacity Pressure plate
kg pounds
645-41064-3 P603S-4XLF-3Z7-AC-2A7.16-S13-SE 115/230 VAC 4 9 •
645-41062-3 P603S-8XLF-3Z7-AC-2A7.16-S13-SE 115/230 VAC 8 18 •
645-41110-2 P603S-8XLBO-3Z7-AC-3A7.16-S12-SE 115/230 VAC 8 18 —
645-41062-4 P603S-8XLBO-3Z7-AC-3A7.16-S19-SE 115/230 VAC 8 18 —
645-41119-2 P603S-10XLF-3Z7-AC-2A1.01-S13-SE 115/230 VAC 10 22 •
645-41073-5 P603S-15XLF-3Z7-AC-2A7.16-S13-SE 115/230 VAC 15 33 •
645-41064-8 P603S-4XLF1-3Z7-12-1A7.16-S01-SE 12 V DC 4 9 •
645-41175-5 P603S-4XNBO-3Z7-12-1A7.16-S22-SE 12 V DC 4 9 —
645-41064-7 P603S-4XNBO-3Z7-12-2A7.16-S01-SE 12 V DC 4 9 —
645-41110-3 P603S-8XLF1-3Z7-12-1A7.16-S01-SE 12 V DC 8 18 •
645-41064-4 P603S-4XLBO-3Z7-24-1A7.16-S17-SE 24 VDC 4 9 —
645-41064-6 P603S-4XLF-3Z7-24-1A7.16-S13-SE 24 VDC 4 9 •
645-41064-2 P603S-4XNBO-3Z7-24-1A7.16-S01-SE 24 VDC 4 9 —
645-41062-9 P603S-8XLF-3Z7-24-1A7.16-S01-SE 24 VDC 8 18 •
645-41062-8 P603S-8XLBO-3Z7-24-2A7.16-S19-SE 24 VDC 8 18 —
645-41062-7 P603S-8XLF-3Z7-24-1A7.16-S03-SE 24 VDC 8 18 •
645-41119-1 P603S-10XLF -3Z7-24-1A7.16-S13-SE 24 VDC 10 22 •
Accessories
Part number Tank capacity Description
276764 15 kg 33 pounds A set of tanks, convertible to 4 or 8 kg, 9 or 18 pounds, tanks without pressure plates for 15 kg, tank 33 pounds
276765 20 kg 44 pounds A set of tanks, convertible to 4 or 8 kg, 9 or 18 pounds, tanks without pressure plates for 20 kg, tank 44 pounds

Related products