LubriLean Smart

LubriLean Smart

LubriLean Smart

Minimum quantity lubrication (MQL) units with internal and external lubricant supply

The SKF LubriLean Smart minimum quantity lubrication system consists of a lubricant reservoir, one or more mixing control units, and lubrication lines with spray nozzles. Compressed air supplied to the system pressurizes the lubricant reservoir, which then delivers lubricant through a separate line to the spray nozzle via the piping system.

The aerosol delivered to the lubrication point is formed at the nozzle outlet using the Venturi principle. Air passing through the oil outlet port entrains the lubricant and converts it into a finely dispersed mixture. The nozzle's special concentric design creates a focused stream of oil-air mixture, preventing it from expanding, allowing the aerosol to be delivered to the lubrication point with extreme precision. This prevents aerosol contamination of adjacent components.

Technical characteristics and advantages

  • Ease of upgrade
  • Easy to adjust
  • High performance
  • High operational reliability
  • No leaks after shutdown
  • Possibility of increasing the spray distance (up to 300 mm)
  • Low lubricant consumption for jet formation
  • Improving the quality of surface treatment
  • No lubricant residue on the workpiece or chips
  • Improving workplace safety and reducing environmental impacts
  • Quick payback of the system due to increased tool service life

Application areas

  • Drilling, milling, punching, thread cutting
  • Universal milling machines
  • Minimum quantity lubrication systems with external lubricant supply, up to two points
Category:

Description

Technical specifications
Operating principle Minimum quantity lubrication feed unit
Lubricant Oil
Working volume 0.3; 0.5; 0.8 l
Number of outlet holes 1–2
Compressed air channel more than 4 bar more than 58 psi
Oil consumption 5–100 ml/h 0.17–3.38 fl oz/hr
Air flow 50 nl/min 0,0000016  fluid ounces/min
Installation position vertical
Ordering information
Part number Number of nozzles Tank capacity
UFS20-001 1 0.3 l
UFS20-005 2 0.3 l
UFS20-002 1 0.5 l
UFS20-006 2 0.5 l
UFS20-003 1 0.8 l
UFS20-007 2 0.8 l
Accessories
Part number Description
skf.com-0901d196808adbbc-LubriLean Coaxial type valve UFZ.U00-128 2/2-way ball valve
Max. working pressure 100 bar (1450 psi)
skf.com-0901d196800fa682-Ball valve 3/2-way UFZ.U00-041 3/2-way ball valve
Max. working pressure 100 bar (1450 psi)
skf.com-0901d196808adbe7-LubriLean plastic line with nozzle UFZ.U00-070 (5 m)
UFZ.U00-071 (10 m)
UFZ.U00-080 (15 m)
UFZ.U00-072 (20 m)		 Basic pipeline installation
coaxial, assembled
Material: Polyurethane
skf.com-0901d196808adbce-LubriLean steel line with nozzle UFZ.U00-067(5 m)
UFZ.U00-068 (10 m)
UFZ.U00-079 (15 m)
UFZ.U00-069 (20 m)		 Basic pipeline installation
coaxial, assembled
Material: Steel shell
skf.com-0901d196808adbcf-LubriLean Concentric flow nozzle UFZ.U00-022 Concentric nozzle
External lubrication for SKF LubriLean Basic/Smart systems
skf.com-0901d196800fa683-UFZ.U00-037 UFZ.U00-037 Nozzle for sawing operations
External lubrication for SKF LubriLean Smart/Basic systems
Lubricants
LubriOil LubriFluid F100
Part number OEL…-LUBRIOIL 1) OEL..-LUBRI-F100 1)
Tank capacity 2.5; 5; 10 l 2.5; 5; 10 l
Warp fatty acid ester higher alcohol
Tested according to DIN 51757, density at +20 °C 0.92 g/cm3 0.84 g/cm3
Tested according to DIN 51562, viscosity at +40 °C 47 mm2/With 25 mm2/With
Test according to DIN ISO 2592, flash point 265 °C (509 °F) 184 °C (363.2 °F)
  1. 1)
    Please add the required tank capacity to the order number. Example: OEL5-LUBRIOIL

Related products