Description
SKF LGWA 2 is a high-quality grease based on mineral oil and lithium complex soap with extreme-pressure additives. LGWA 2 is recommended for general industrial and automotive applications where loads and temperatures exceed the temperature range of multipurpose greases.
Technical characteristics and advantages
- Effective lubrication at peak temperatures up to 220°C (430°F) for short periods of time
- Protection of wheel bearings in severe operating conditions
- Effective lubrication in wet conditions
- Excellent anti-corrosion properties and water resistance
- Excellent lubrication under high loads and low speeds
Application areas
- Wheel bearings in cars, trailers and trucks
- Washing machines
- Fans and electric motors
| Capacity of the container | Designation |
| 200g tube | LGWA 2/0.2 |
| 420 ml cartridge | LGWA 2/0.4 |
| 1 kg canister | LGWA 2/1 |
| 5 kg canister | LGWA 2/5 |
| 18 kg canister | LGWA 2/18 |
| 50 kg barrel | LGWA 2/50 |
| 180 kg barrel | LGWA 2/180 |
| Gas-powered lubricators | |
| LAGD series 60 ml | LAGD 60/WA2 |
| LAGD series 125 ml | LAGD 125/WA2 |
| Lubricators with electromechanical drive | |
| TLSD Series 125 ml | TLSD 125/WA2 |
| TLSD Series - replacement set 125 ml | LGWA 2/SD125 |
| TLSD Series 250 ml | TLSD 250/WA2 |
| TLSD Series - replacement set 250 ml | LGWA 2/SD250 |
| Lubricators with electromechanical drive | |
| TLMR 101 Series - 120 ml replacement set (with battery) | LGWA 2/MR120B |
| TLMR 201 Series - replacement set 120 ml | LGWA 2/MR120 |
| TLMR 101 Series - 380 ml replacement set (with battery) | LGWA 2/MR380B |
| TLMR 201 Series - replacement set 380 ml | LGWA 2/MR380 |
| Designation | LGWA 2/(tank volume) | |
| Code according to DIN 51825 | KP2N-30 | |
| NLGI consistency class | 2 | |
| Thickener | Lithium complex | |
| Color | Amber | |
| Base oil type | Mineral | |
| Operating temperature range | from −30 to +140 °C (from −20 to +285 °F) | |
| Dropping point according to DIN ISO 2176 | >250 °C (>480 °F) | |
| Base oil viscosity | 40 °C, mm²/s | 185 |
| 100 °C, mm²/s | 15 | |
| Penetration according to DIN ISO 2137 | 60 dives, 10–¹ mm | 265–295 |
| 100,000 dives, 10–¹ mm | max +50 (max 325) | |
| Mechanical stability | Rolling stability, 50 h at 80°C, 10–¹ mm | +50 max change |
| V2F vehicle testing | «"M"» | |
| Corrosion protection | Emcor: ISO 11007 standard | 0–0 |
| Emcor: – Water washout test | 0–0* | |
| Water resistance | to DIN 51 807/1, 3 h at 90 °C | max 1 |
| Oil separation | according to DIN 51 817, 7 days at 40 °C, static, % | 1–5 |
| Lubricity | R2F, test B at 120°C | Positive at 100°C (210°F) |
| Copper corrosion | DIN 51 811 | max 2 at 100°C (210°F) |
| Anti-seize properties | Wear test according to DIN 51350/5, 1400 N, mm | max 1.6 |
| Four-ball test, welding load according to DIN 51350/4, N | min. 2600 | |
| Shelf life | 5 years | |
| * Typical value | ||
