LMC 101 Controller

For single-line and sequential lubrication systems

The LMC 101 is a universal control and monitoring device for single-line and sequential lubrication systems. It is designed for off-road and mobile equipment, as well as for all low-voltage lubrication systems. It can be used in the driver's cab or indoors in industrial facilities.

Timer or controller mode can be configured for both systems. The LMC 101 is programmed using a PC connected via USB. In timer mode, the lubrication cycle ends after a preset time. In controller mode, the lubrication cycle ends when a pressure switch, pressure sensor, or piston sensor is triggered.

Once the set pressure on the pump is reached, the system releases pressure in the supply pipeline.

Technical characteristics and advantages

For 12V and 24V DC powered systems
Timer or controller mode
Various settings for alarm triggering parameters
Programming, data logging and reporting
The controller is programmed using a PC connected via a USB port.
Manual lubrication button

Application areas

Off-road equipment
Mobile equipment
Industrial equipment operated indoors
Food industry
Single-line and sequential systems

Description

Technical specifications
Operating principle	electronic controller
Operating temperature	from −40 to +66 °C	from −40 to +150 °F
Supply voltage	12 or 24 VDC; -20/+30 %
Protection class	NEMA 12
Pump relay contact	20A at 30VDC
Contacts of the supply relay and signal relay	2A at 30VDC
Non-working hours (regulated)	from 15 sec to 99 h
Working hours (regulated)	2A at 30VDC
Protection class	IP 52
Case size	186 x 120 x 59 mm	7.3 x 4.7 x 2.3 inches
Installation dimensions	172 x 89 mm	6.75 x 3.5 inches