Skip to main content
We combine the best and turn it into something reliable!
We combine the best and turn it into something reliable!
+7 701 419 2752
+7 7172 50 19 34
+7 7172 48 34 86
tpgt@tpgt.kz

010000, RK, Astana,
st. Dinmukhameda Kunaev 33,
office 1003
Mark on the map

How AirScrape works

AirScrape ® — is a side skirt sealing system for belt conveyors that was developed, patented and manufactured in Germany in accordance with the highest quality, safety and environmental standards.

This non-contacting conveyor skirt sealing system, which acts as a highly effective side seal, is suspended above the conveyor belt. A unique diagonal arrangement of hardened vanes directs air from the outside into the center of the belt, creating air suction. The movement of the material and the moving belt support enhance the suction effect, ensuring that fine dust particles remain within the conveyor section. Furthermore, coarse materials pushed outward are directed back into the center of the belt by the vanes, significantly reducing spillage.

Innovative AirScrape design ® This conveyor belt sealing system has a triple positive effect. It reduces spills and dust formation at transfer points and other critical sections of the conveyor chain. Furthermore, because this skirt sealing system floats freely above the conveyor belt, skirt friction and belt damage are eliminated, and the service life of every conveyor component is extended.

Advantages and benefits

  • This conveyor skirt sealing system works effectively with both large and small particles.
  • Reduces dust emissions and explosion hazard
  • Damage to the belt is eliminated due to the absence of contact with the skirt
  • The hardened steel blades of this conveyor apron system reduce apron wear. .
  • Reduced engine power consumption due to the absence of belt friction on the edge
  • Significantly extends service life due to the absence of contact with the belt
  • Minimal product loss
  • AirScrape significantly reduces maintenance and replacement costs
  • Easy installation, usually using existing clamping system
  • This innovative skirting system provides a continuous skirting board without gaps.
  • Promotes health and environmental protection

Comparison of AirScrape® and conventional side sealing

The photo shows the transfer point before and after modification with AirScrape®. In a direct comparison, the effect of AirScrape® is clearly visible. Dust formation and spills are no longer visible.

AirScrape® Application Examples

    AirScrape ® — LARGE

    Technical data

    Carrier material Polyurethane, optional
    - wear-resistant = standard
    - fire-resistant and anti-static
    — FDA
    - heat-resistant material on request
    Shore Shore A hardness 70 ± 5
    Operating temperature -30° to + 80° C
    Lamel material > 360 HB or stainless steel
    Length of the system 2 m to the right and left

    Suitable for gutter angle (X°)
    from 0° to 45°
    Belt extension: > 102 mm

    X° HOUR G
    0° 117 102
    10° 119 105
    15° 121 108
    20° 122 110
    25° 125 115
    30° 128 120
    35° 133 125
    40° 141 133
    45° 148 140

    AirScrape ® - Medium

    Technical data

    Carrier material Polyurethane, optional
    - wear-resistant = standard
    - fire-resistant and anti-static
    — FDA
    - heat-resistant material on request
    Shore Shore A hardness 70 ± 5
    Operating temperature -30° to + 80° C
    Lamel material > 360 HB or stainless steel
    Length of the system 2 m to the right and left

    Suitable for gutter angle (X°)
    from 0° to 45°
    Tape protrusion: > 75 mm

    X° HOUR G
    0° 112 75
    10° 114 78
    15° 117 80
    20° 118 82
    25° 119 86
    30° 120 90
    35° 124 94
    40° 128 100
    45° 129 102

    AirScrape ® - SMALL

    Technical data

    Carrier material Polyurethane, optional
    - wear-resistant = standard
    - fire-resistant and anti-static
    — FDA
    - heat-resistant material on request
    Shore Shore A hardness 70 ± 5
    Operating temperature -30° to + 80° C
    Lamel material stainless steel
    Length of the system 2 m to the right and left

    Suitable for gutter angle (X°)
    from 0° to 45°
    Tape protrusion: > 60 mm

    X° HOUR G
    0° 97 60
    10° 98 62
    15° 99 66
    20° 101 69
    25° 103 73
    30° 106 78
    35° 112 82
    40° 117 91
    45° 123 95