SM-100

SM-100

Integrated compact oil circulation system

The unit can supply oil to one or two small pieces of equipment with a total flow rate of 7 l/min. The system pressure is regulated by variable frequency drives. Other standard systems use a drain valve, which leads to energy loss, component wear, and deterioration of the oil's properties. The reservoir is equipped with a heating element to control oil viscosity during startup. An optional cooler reduces the temperature of the filtered oil entering the bearings. A bypass valve allows for replacement of the filter element during operation.

For large fans, SKF offers a range of Flowline oil circulation systems, tailored to individual customer requirements.

Technical characteristics and advantages

  • Energy saving oil supply unit with one or two pumps
  • Ease of placement, installation and operation
  • Efficient air cooler (special version without cooler available)
  • Compact power supply with frequency converters (can also be supplied without a power supply)
  • Compact electronic control system (can also be supplied without control system)

Application areas

The unit can supply oil to one or two small-sized units of equipment with a total flow rate of 7 l/min.

  • Fans, refiners, washing machines, gearboxes, electric motors
  • Presses, roller systems, pumps, crushers
Categories: ,

Description

Technical specifications
Operating principle gerotor pump unit with electric drive
Lubricant lubricating and hydraulic oils
Working viscosity 30–1000 mm2/With
Consumption 2–7 l/min 4.2–14.8 pints/min
Number of lubricant outlets1) 1–10
Ambient temperature from +10 to +40 °C from +50 to +104 °F
Oil temperature from +10 to +70 °C from +50 to +158 °F
Working pressure max 10 bar 145 psi
Tank 100 l 211 pints
Tank material carbon steel (painted)
Heating device with thermostat for oil tank from 20 to 50 °C after 6 hours 68 to 122°F after 6 hours
Oil filtration 5 microns
Voltage 400 V AC / 50 Hz
Pressure connection G/NPT 1/2; G/NPT 1; G/NPT 1 1/4
Protection class IP 54
Dimensions 1200 × 550 × 840 mm 47.25 x 21.65 x 33 inches
Installation position vertical
  1. 1)
    The number of outputs depends on the design of the selected SKF Flowline Monitor
Ordering information
Order number Designation 1) Number of pumps Number of filters Cooling Control unit
13141098 SM-30-1P-1F-PNTST-XX 1 1 — Relay control with power supply
13141099 SM-30-1P-1F-PNTST-WAC 1 1 Water Relay control with power supply
13141100 SM-30-1P-1F-PNTST-AIC 1 1 Air Relay control with power supply
13143400 SM-100-1P-1F-PNTST-XX 1 1 — ST-2240
13143410 SM-100-2P-1F-PNTST-XX 2 1 — ST-2240
13143450 SM-100-1P-1F-PNTST-WAC 1 1 Water ST-2240
13143420 SM-100-1P-1F-PNTST-AIC 1 1 Air ST-2240
13143460 SM-100-2P-1F-PNTST-WAC 2 1 Water ST-2240
13143430 SM-100-2P-1F-PNTST-AIC 2 1 Air ST-2240
13143461 SM-100-1P-2F-SS-XX 1 2 — ST-2240
13143462 SM-100-2P-2F-SS-XX 2 2 — ST-2240
13143463 SM-100-1P-2F-SS-WAC 1 2 Water ST-2240
13143464 SM-100-1P-2F-SS-AIC 1 2 Air ST-2240
13143465 SM-100-2P-2F-SS-WAC 2 2 Water ST-2240
13143466 SM-100-2P-2F-SS-AIC 2 2 Air ST-2240
13143470 SM-200-1P-2F-SS-xx 1 2 — ST-2240
13143471 SM-200-2P-2F-SS-xx 2 2 — ST-2240
13143472 SM-200-1P-2F-SS-WAC 1 2 Water ST-2240
13143473 SM-200-1P-2F-SS-AIC 1 2 Air ST-2240
13143474 SM-200-2P-2F-SS-WAC 2 2 Water ST-2240
13143475 SM-200-2P-2F-SS-AIC 2 2 Air ST-2240
  1. 1)
    Tank material:
    PNTST = painted
    SS = AISI 304

Related products