Description
| Operating principle | flow limiter | |
| Exits | 1 | |
| Lubricant | environmentally friendly mineral and synthetic oils | |
| Viscosity | 20–600 mm2/With | |
| Consumption1) | 6–38 l/min | 12.6–80.3 pints/min |
| Operating temperature | from 0 to +100 °C | from +32 to +212 °F |
| Working pressure | 5–200 bar | 72–2900 psi |
| Differential pressure | >5 bar | >72 psi |
| Material | gray cast iron, galvanized | |
| Input connection | M12×1; four-pin connector | |
| Protection class | IP 65 | |
| Signal sensors E4/E5 | 24V to 230V AC/DC; IP 65 | |
| E6 proximity switch | 12 to 36 V DC current; IP 67 | |
| Dimensions | min. 40 × 90 × 138 mm max. 40 × 90 × 245 mm |
1.57 x 3.54 x 5.43 inches 1.57 x 3.54 x 9.63 inches |
| Installation position | any, preferably vertical | |
| The product can be configured using a configuration code. The flow rate must be adjusted according to the insert nozzle size, as shown in the table below. | |
| 24-2703-0… | SMB03 without monitoring, … plug-in nozzle size = see table below |
| 24-2703-6… | SMB03 with piston sensor E6, … insert nozzle size = see table below |
| 24-2703-7… | SMB03 with E4 signal transmitter, … insert nozzle size = see table below |
| 24-2703-8… | SMB03 with signal transmitter E5, … plug-in nozzle size = see table below |
| ATEX versions are available upon request, ATEX only (EX II 3cII CT6), without monitoring or with an E5 signal transmitter. Add "ATEX" to the end of the part number. More detailed information is provided in the product catalogue. |
|
| Part number | Consumption | Nozzle | |
| l/min | pints/min | ∅ mm | |
| 250 | 6,00 | 12,6 | 2,50 |
| 260 | 6,50 | 13,7 | 2,6 |
| 270 | 6,75 | 14,2 | 2,7 |
| 280 | 7,00 | 14,8 | 2,8 |
| 290 | 7,50 | 15,6 | 2,9 |
| 300 | 8,00 | 16,9 | 3,0 |
| 310 | 8,75 | 18,5 | 3,1 |
| 320 | 9,25 | 19,5 | 3,2 |
| 330 | 9,75 | 20,6 | 3,3 |
| 340 | 10,50 | 22,1 | 3,4 |
| 350 | 11,00 | 23,2 | 3,5 |
| 360 | 11,50 | 24,3 | 3,6 |
| 370 | 12,00 | 25,4 | 3,7 |
| 380 | 12,75 | 26,9 | 3,8 |
| 390 | 13,50 | 28,5 | 3,9 |
| 400 | 14,00 | 29,6 | 4,0 |
| 410 | 14,75 | 31,1 | 4,1 |
| 420 | 15,50 | 32,8 | 4,2 |
| 430 | 16,00 | 33,8 | 4,3 |
| 440 | 16,75 | 35,4 | 4,4 |
| 450 | 17,50 | 26,9 | 4,5 |
| 460 | 18,00 | 38,0 | 4,6 |
| 470 | 18,75 | 39,6 | 4,7 |
| 480 | 19,50 | 41,2 | 4,8 |
| 490 | 20,25 | 42,8 | 4,9 |
| 500 | 21,00 | 44,4 | 5,0 |
| 510 | 21,75 | 45,9 | 5,1 |
| 520 | 22,50 | 47,6 | 5,2 |
| 530 | 23,25 | 49,1 | 5,3 |
| 540 | 24,00 | 50,7 | 5,4 |
| 550 | 25,00 | 52,8 | 5,5 |
| 560 | 26,00 | 54,9 | 5,6 |
| 570 | 27,00 | 57,0 | 5,7 |
| 580 | 28,00 | 59,1 | 5,8 |
| 600 | 30,00 | 63,4 | 6,0 |
| 650 | 34,00 | 71,9 | 6,5 |
| 690 | 38,00 | 80,3 | 6,9 |
| Part number | Description |
| 24-0404-2119 | Seal kit |
| 24-1072-2113 | E4 signal transmitter without contact connector |
| 24-1072-2115 | E4 Signal Transmitter with Contact Connector, with LED 24VDC |
| 24-1882-2151 | E4 connector with 24VDC LED |
| 24-1072-2112 | E5 signal transmitter without contact connector |
| 24-1072-2114 | E5 Signal Transmitter with Contact Connector, with LED 24VDC |
| 24-1882-2121 | E5 with contact connector, without LEDs |
| 24-1884-2282 | Piston sensor E6 |
| 179-990-371 | straight connector, four-pin, M12×1 |
| 179-990-372 | angular connector, four-pin, M12×1 |
| 179-990-600 | straight connector, four-pin, M12×1, with 5 m orange cable |
| 179-990-601 | Angled connector, four-pin, M12×1, with 5 m orange cable |
| 84-8011-0369 | group monitoring unit |
| Part number | Description |
| 24-1883-2081 | SMB 3 without nozzle, without signal transmitter |
