Насос P653S с электрическим приводом
Насос P653S с электрическим приводом - Image 2
Насос P653S с электрическим приводом - Image 3
Насос P653S с электрическим приводом - Image 4

P653S Electric Drive Pump

For single-line lubrication systems

The fully integrated P 653S pump unit exemplifies Lincoln's commitment to providing innovative and cost-effective solutions using industry-leading technology. This cost-effective, next-generation pump is available in four reservoir sizes and is easily adapted to a wide range of applications. It is also compatible with telematics systems found in modern heavy equipment. A neutral switch allows mobile equipment to idle with power to the pump, while the timer is disabled, allowing manual lubrication. All pumps are equipped with low-level and system fault alarms.

Simply install the pump, connect the power lines and supply piping, and the system is ready to go.

Technical characteristics and advantages

  • Reduced operational risks compared to standard automatic lubrication systems
  • High safety standards
  • Compliance of the lubrication system with high requirements

Application areas

  • Integration of key components into system designs reduces operating costs
  • Ready-to-use pump design for reduced installation time
  • The neutral switch ensures low consumption of plastic lubricant
Brochures and manuals
Product catalog (9.9 MB)
Category:

Description

Technical specifications
Operating principle electrically driven piston pump
Exits 1
Dosage volume max 24 cm3/min 1.5 inches3/min
Lubricant oil: min. 40 mm2/With
plastic lubricant: up to and including NLGI class 2
Operating temperature In post. current: −40 to +70 °C
In alternating current: from 0 to +50 °C		 from −40 to +158 °F
from +32 to +122 °F
Working pressure
pressure switch, fixed value:
pressure sensor, adjustable:
pressure sensor, factory set:
Setting of pressure limit switch and sensor, fixed:		 240 bar
96–317 bar
82 bar
172 bar
3500 psi
1400–4600 psi
1200 psi
2500 psi
Tank capacity oil: 4 or 8 l
plastic grease: 4; 8; 10; 15; 20 kg		 1 or 2 gallons
8.8; 18; 33 or 44 pounds
Material (tank) thermoplastic
Output connection G 1/4
Input voltage oil: 120/230 VAC
Grease: 19-31 VDC or 100-240 VAC
Current DC: Max 10A
AC current: max. 1.7 A
Frequency AC: 47 to 63 Hz
Pause time max 59 hours 59 minutes
min. 4 minutes;
Increasing the pause time 1 hour or 1 minute
Download time max 12 minutes
Dimensions min. 240 × 235 × 467 mm
max. 240 × 235 × 800		 9.45 x 9.25 x 18.4 inches
9.45 x 9.25 x 31 inches
Installation position Vertical, i.e. the lubricant reservoir is at the top
The pressure plate version can also be used in rotating conditions
Pump elements
Piston ø 7 mm 0.28 inches
Number of connections 3
Protection IP 6K9K
Ordering Information - Oil Version
Part number Operating voltage Tank capacity Designation
80127 120/230 VAC, 50/60 Hz 4 l 1 gal. Pump with internal switch and pressure sensor,
without limit switch and pressure sensor
80128 120/230 VAC, 50/60 Hz 8 liters 2 gal Pump with internal switch and pressure sensor,
without limit switch and pressure sensor
Ordering Information - Grease Version
Part number Operating voltage Tank capacity Designation
80086 24 VDC 4 kg 9 pounds Pump with internal pressure switch
80087 24 VDC 4 kg 9 pounds Pump with internal pressure sensor
80105 24 VDC 4 kg 9 pounds Pump with internal and limit pressure switch
80106 24 VDC 4 kg 9 pounds Pump with internal and end pressure sensor
80076 24 VDC 4 kg 9 pounds Pump with pressure plate and internal pressure switch
80077 24 VDC 4 kg 9 pounds Pump with pressure plate and internal pressure sensor
80109 24 VDC 4 kg 9 pounds Pump with pressure plate, internal and limit pressure switch
80110 24 VDC 4 kg 9 pounds Pump with pressure plate, internal and end pressure sensor
80090 24 VDC 8 kg 18 pounds Pump with internal pressure switch
80091 24 VDC 8 kg 18 pounds Pump with internal pressure sensor
80107 24 VDC 8 kg 18 pounds Pump with internal and limit pressure switch
80108 24 VDC 8 kg 18 pounds Pump with internal and end pressure sensor
80080 24 VDC 8 kg 18 pounds Pump with pressure plate and internal pressure switch
80081 24 VDC 8 kg 18 pounds Pump with pressure plate and internal pressure sensor
80111 24 VDC 8 kg 18 pounds Pump with pressure plate, internal and limit pressure switch
80112 24 VDC 8 kg 18 pounds Pump with pressure plate, internal and end pressure sensor
80121 24 VDC 15 kg 33 pounds Pump with pressure plate and internal pressure sensor
80122 24 VDC 15 kg 33 pounds Pump with internal pressure sensor
80120 24 VDC 22 kg 44 pounds Pump with internal pressure sensor
80083 120/230 VAC 4 kg 9 pounds Pump with internal pressure sensor
80084 120/230 VAC 4 kg 9 pounds Pump with internal and limit pressure switch
80085 120/230 VAC 4 kg 9 pounds Pump with internal and end pressure sensor
80072 120/230 VAC 4 kg 9 pounds Pump with pressure plate and internal pressure switch
80073 120/230 VAC 4 kg 9 pounds Pump with pressure plate and internal pressure sensor
80074 120/230 VAC 4 kg 9 pounds Pump with pressure plate, internal and limit pressure switch
80075 120/230 VAC 4 kg 9 pounds Pump with pressure plate, internal and end pressure sensor
80088 120/230 VAC 8 kg 18 pounds Pump with internal pressure switch
80089 120/230 VAC 8 kg 18 pounds Pump with internal pressure sensor
80078 120/230 VAC 8 kg 18 pounds Pump with pressure plate and internal pressure switch
80079 120/230 VAC 8 kg 18 pounds Pump with pressure plate and internal pressure sensor
80134 120/230 VAC 15 kg 33 pounds Pump with internal pressure sensor
80135 120/230 VAC 20 kg 44 pounds Pump with pressure plate, internal and end pressure sensor

Related products