HJ2 hand operated pump

For dual-line and sequential lubrication systems

The HJ 2 hand-operated pump is designed to supply lubricant to points that do not require continuous lubrication.

This reliable pump has two feed pistons and a 3L reservoir. (0.8 gallons) With a built-in stirring device, it operates effectively even at low temperatures. Operating pressure: 300 bar (4350 psi).

Technical characteristics and advantages

Suitable for use with dual-line or serial systems
Possibility of working with plastic lubricants up to and including NLGI class 3
Available with left or right hand lever

Application areas

Machines for metalworking
Roller straightening machines
Presses with heated bandage
Port cranes

Brochures and manuals

Catalog "Dual-Line Lubrication Systems"« (4.3 MB)

Description

Technical specifications
Operating principle	double-acting piston pump with manual drive
Exits	1
Dosage volume	HJ2: 2 cm³ HJ2A: 2 x 1 cm³	0.122 in³ 0.061 in³
Lubricant	Plastic grease up to and including NLGI class 3, depending on the operating temperature
	Oil with a viscosity of at least 150 mm²/s at operating temperature
Operating temperature	from −20 to +70 °C	from -4 to +160 °F
Working pressure	max 300 bar	4350 psi
Connection of the main pipeline	G 1/4
Tank capacity	3 l	0.8 gallons
Dimensions	410 x 135 x 393 mm	16.1 x 5.5 x 15.5 inches
Installation position	vertical

Ordering information
Part number	Designation	Handle position	Exits
603-41200-1	HJ2 R–3XYN	on the right	1
603-41200-2	HJ2 L–3XYN	left	1
603-41200-3	HJ2 AR-3XYN	on the right	2
603-41200-4	HJ2 AL-3XYN	left	2

Accessories
Part number	Designation	Pipeline, ∅ [mm]
223-13052-1	GERV 6-SG 1/4 AVCF	6
223-13052-2	GERV 8-LG 1/4 AVCF	8
223-13052-3	GERV 10-LG 1/4 AVCF	10