Насос GTP-C для перекачивания пластичной смазки

GTP-C pump for pumping plastic grease

For drums with plastic grease with a capacity of up to 180 kg / 216 l (55 gallons / 400 pounds)

To use the GTP-C pump, simply turn on the main switch located on the junction box. Two LEDs indicate the pump's operating status. The green LED indicates power, while the yellow LED indicates the pump is ready for operation. Pressing and holding the button on the wired remote control causes the GTP-C pump to continuously dispense grease. Grease in the drum or reservoir is extracted from under the pressure plate and dispensed by the pump. When the pressure plate reaches the bottom of the drum, a minimum level switch is activated, automatically shutting off the pump. Empty drum replacement is simplified by opening the valve.

Technical characteristics and advantages

  • Fully electric drive
  • Filling hose with quick-release nipple or threaded connection M30x2
  • High performance – up to 1100 cm³/min (0.29 gallons/min)
  • High efficiency without the need for compressed air
  • Fast filling even at low temperatures
  • An alternative to manual filling, saving time and effort
  • Ease of use in mobile vehicles

Application areas

  • Mobile use for maintenance professionals
  • Filling pump reservoirs for centralized lubrication. Applications:
    • Wind energy
    • Mobile service stations
    • Vehicles for the mining and construction industries
    • General mechanical engineering and industrial technologies
Brochures and manuals
 Product brochure (418.3 KB)
 Operating instructions (3.0 MB)
Category:

Description

Technical specifications
Lubricant NLGI Class 1 and 2 Greases
Volume of the barrel 5 Gallon Only - 120V/60Hz
25 kg / 30 l
50 kg / 60 l
180 kg / 216 l
Feed volume max. 1100 cm³/min
Nominal discharge pressure max 100 bar 1450 psi
Flow pressure max 700 mbar 10 psi
Operating temperature from 0 to +50 °C from +32 to +122 °F
System voltage 230 V / 50 Hz
120 V / 60 Hz
Electric motor power 0.37 kW
Protection class IP54
Insulation class F
Filling hose with quick-release fitting or
connection with M30x2 thread
Control using a wired remote control (5/10/15 m)
Ordering information
799-000-3161 Skid-mounted filler pump with pressure plate in shipping container, 120 VAC/60 Hz
799-000-3109 Skid-mounted filling pump with pressure plate in transport container, 230 VAC/50 Hz, 25 kg reservoir
799-000-3112 Skid-mounted filling pump with pressure plate in transport container, 230 VAC/50 Hz, 25 kg reservoir
799-000-3119 Skid-mounted filling pump with pressure plate in transport container, 230 VAC/50 Hz, 50 kg reservoir
799-000-3118 Skid-mounted filling pump with pressure plate in transport container, 230 VAC/50 Hz, 180 kg reservoir

Related products