Modular UV dosing units

For sequential lubrication systems

UV are modular dispensing units. They consist of a base panel and dispensing segments. The base panel has one inlet segment, three to eight intermediate segments, and one end segment, which are held in place by three tie rods. This part consists of 3 to 8 dispensing segments (depending on the required number of outlets), which are attached to the base panel. FKM sealing rings are installed between all components.

A minimum of three metering segments is required. Metering segments have single or dual outlets. If a single metering segment or channel combination panel is used, the unused outlet must be plugged. Metering devices must be ordered as separate components.

Technical characteristics and advantages

  • Alternative output ports for installing operation indicators
  • Additional dosing segments with visual cycle indicator
  • Optional bypass metering segment for adding or removing lubrication points

Application

  • Industrial equipment
  • Machines for metalworking
  • Loading and unloading equipment
Category:

Description

Technical specifications
Operating principle segmented dosing devices
Exits 6–16
Lubricant oil or plastic grease of NLGI grades 0–2
Dosing volume per feed cycle and output
min. 0.082 cm³ 0.005 in³
Max. 1,311 cm³ 0.08 in³
Max. working pressure 240 bar 3500 psi
Material
frame galvanized steel
seals fluororubber (FKM)
Input connection 1/4 NPSF (F)
Output connection 1/8 NPSF (F)
Dimensions
min. 115 × 76 × 57 mm 4.52 x 3 x 2.25 inches
Max. 232 × 76 × 57 mm 9.13 x 3 x 2.25 inches
Installation position any
Technical specifications of the UV support panel and tie rods 1)
Exits Input segment Terminal segment Tie rod 1) Intermediate segment Dosing valves
Part number Part number quantity quantity
6 87918 87920 250290 87919 3 3
8 87918 87920 250291 87919 4 4
10 87918 87920 250292 87919 5 5
12 87918 87920 250293 87919 6 6
14 87918 87920 250294 87919 7 7
16 87918 87920 250295 87919 8 8
Single outlet metering valves S 2)
Part number, standard Cycle indicator on the right Designation Output dosing volume
cm3 inches3
882051 05S 0,164 0,010
882051 10S 0,328 0,020
882051 15S 0,492 0,030
882201 882203 20S 0,656 0,040
882251 882253 25S 0,820 0,050
882301 882203 30S 0,983 0,060
882351 882253 35S 1,147 0,070
882401 882403 40S 1,311 0,080
Double outlet metering valves T 2)
Part number, standard Cycle indicator on the right Designation Output dosing volume
cm3 inches3
882052 05T 0,082 0,005
882052 10T 0,164 0,010
882052 15T 0,246 0,015
882202 882204 20T 0,328 0,020
882252 882254 25T 0,410 0,025
882302 882204 30T 0,492 0,030
882352 882254 35T 0,574 0,035
882402 882404 40T 0,656 0,040

Accessories

Plug for closing unused outputs.
The External Output Splice Kit combines alternative output channels to combine the volume of two metering segments into a single output.

Plug and connect the outputs
Part number Description
68645 plug
87905 single set and set for connecting outputs

Atmospheric unloading indicators: rupture disc for relieving high pressure, pressure relief device and lubricant into the atmosphere.
Reset-type operation indicators: The indicator is pushed out by high pressure. Return the indicator to its place after the pressure is released.
All components have 1/8 NPTF (M) threads.

Operation and pressure relief indicators
Part number Type Disc color Nominal pressure
bar pounds per inch²
87934 release of pressure into the atmosphere yellow 100 1450
87935 release of pressure into the atmosphere red 120 1750
87936 release of pressure into the atmosphere violet 224 3250
87937 release of pressure into the atmosphere yellow/neutral 255 3700
87938 reset 35 500
87939 reset 69 1000
87940 reset 103 1500
87941 reset 138 2000
87942 reset 207 3000