Компактный насос CLP для последовательных систем

Compact CLP pump for sequential systems

For sequential lubrication systems

The new compact CLP series pump is the first in the next-generation SKF eLube product range. It works with compact progressive lubrication systems. Lightweight, simple, and easy to use, this pump boasts a compact design and reliable performance in mobile and industrial applications. All CLP models are suitable for liquid and solid greases and feature a pressure plate to ensure a continuous supply of lubricant. For easy priming, the pumps are equipped with a standard grease fitting at the bottom. The fill level can be visually checked on all pump models.

Models CLP Basic And Basic Plus Available in 12V and 24V versions for mobile use and 24V versions for industrial use. Model Control Basic And Basic Plus can be accomplished via an external lubrication controller or equipment control system.

Executions CLP Basic Plus are equipped with a filling level monitoring system, which provides an early warning that the pump is running low on lubricant. Basic Plus For use in mobile equipment, they come with a push-button for initiating an additional lubrication cycle. This helps quickly check the system's proper operation.

Technical characteristics and advantages

  • Bayonet plug for mobile equipment or square plug for industrial equipment
  • Pressure plate to ensure continuous supply of lubricant
  • Heavy-duty steel bracket for use in vibration-prone mobile applications
  • Visual level control
  • Built-in fill level control system
  • Manual lubrication button to start an additional lubrication cycle (CLP Basic Plus Mobile)
  • Two pump elements to provide lubricant flow rate of up to 3 cm3/min per element

Application areas

  • Versions for mobile equipment:
    • Construction equipment
    • Agricultural equipment
    • Buses
    • Trucks
  • Designs for industrial equipment:
    • Equipment for the food industry
    • Packaging lines
    • Elevators
    • Conveyors
    • Centrifuges
    • Wind turbines
    • Cranes
Category:

Description

Technical specifications
Operating principle Electric driven lubrication pump
Lubricant Greases: From NLGI 000 to NLGI 2
Maximum working pressure 270 bar 3916 psi
Operating temperature from −25 to +65°C from −13 to +149°F
Useful volume of the tank 1 l 0.26 gallons
Number of pump elements max 2
Pump element 1) 6
Lubricant consumption 2) ~3 cm3/min
IP protection class 3) IP 6K9K
Corrosion load category C3
Voltage 12/24 VDC
Working current up to 3 A (max, peak), nominal 1.2 A
Relative duty cycle 15 % ED S3 30 minutes
Electrical protection class III
Output connection G1/4
Installation position any
Dimensions depending on the model (max. H×D×W)
CLP Basic for mobile equipment 218.5 × 187 × 154.5 mm 8.6 x 7.36 x 6.08 inches
CLP Basic for industrial equipment 212 × 187 × 152 mm 8.34 x 7.36 x 5.98 inches
CLP Basic Plus for mobile equipment 218.5 × 187 × 154.5 mm 8.6 x 7.36 x 6.08 inches
CLP Basic Plus for industrial equipment 235 × 187 × 152 mm 9.25 x 7.36 x 5.98 inches
  1. 1)
    Pump element 6 is included in standard kits
    Other pump elements can be ordered using the spare parts/additional components list
  2. 2)
    Lubricant consumption depending on the pump element
  3. 3)
    Protection class depending on the electrical connection

The easiest and fastest way to order new CLP pumps is to choose a pre-assembled kit. By ordering a pre-assembled, standard model, you receive a fully equipped pump specifically designed for use in mobile or industrial equipment. These kits meet all the standard requirements of these applications.

Ordering Information for CLP Basic
Order code Scope of application Peculiarities
CLP-EGXXX1-0000020 CLP-EGXXX1-0000020 Use in mobile equipment, 12V
  • 12 V DC
  • E1/CE conformity
  • Bayonet plug, four-pin, code A 1), on the left side
CLP-EGXXX2-0000020 CLP-EGXXX2-0000020 Use in mobile equipment, 24V
  • 24 VDC
  • E1/CE conformity
  • Bayonet plug, four-pin, code A 1), on the left side
CLP-XGXXX2-0000022 CLP-XGXXX2-0000022 Use in industrial equipment, 24V
  • 24 VDC
  • CE conformity
  • Square plug, code A 1), on the left side
  1. 1)
    Power supply
Ordering Information for CLP Basic Plus
Order code Application Characteristics
CLP-EG1XY1- 0000021 Use in mobile equipment, 12V
  • 12 V DC
  • E1/CE conformity
  • Reinforced mounting bracket
  • Fill level control
  • Bayonet connector, seven-pin, code A (power supply, signal transmission and manual lubrication), left side
  • Additional manual lubrication button on the right side
CLP-EG1XY2- 0000021 Use in mobile equipment, 24V
  • 24 VDC
  • E1/CE conformity
  • Reinforced mounting bracket
  • Fill level control
  • Bayonet connector, seven-pin, code A (power supply, signal transmission and manual lubrication), left side
  • Additional manual lubrication button on the right side
CLP-XG1XX2- 0000023 Use in industrial equipment, 24V
  • 24 VDC
  • CE conformity
  • Fill level control
  • Square plug, code A (power supply), on the left side
  • M12×1, four-pin with code A (signal output), on the right side

Spare parts  1)  /accessories

Pump elements 2)
Order number Description Nominal performance
cm3/min inches3/min
600-78018-1 Pump element L 0,5 0,03
600-26875-2 Pump element 5 1,8 0,11
600-26876-2 Pump element 6 2,8 0,17
600-26877-2 Pump element 7 4 0,24
655-28716-1 Pump element R 0.7–3.3 0.04–0.02
600-29185-1 Pump element B 4 0,241
Adapters and protective screw 2)
Order number Description
519-33840-1 Adapter with grease nipple ST 1/4 NPTF
519-33959-1 Adapter with grease nipple A2 AR 1/4
519-33955-1 Adapter with grease nipple ST AR 1/4
519-60445-1 Security screw M22x1.5
Pressure regulating valve
Order number Description
270864 SVTSV-270-R1/4-1/8NPTFI-NIP00R-A
624-77803-1 SVTSV-270-R1/4-6-NIP00L
624-77802-1 SVTSV-270-R1/4-6-NIP00R
Power cables
Order number Description
664-34167-9 Bayonet plug, four-pin with 10 m cable
664-34428-3 Bayonet plug, seven-pin with 10 m cable
664-35078-9 Square plug with 10m cable
Other
Order number Description
5590-00000002 Connecting coupling cartridge for filling
5590-00000009 Reinforced bracket
  1. 1)
    Spare parts kits may only be used to replace identical defective parts. Modifications to spare parts for existing products are prohibited. Exceptions include pump elements and the additional filling coupling.
  2. 2)
    Gaskets are always included in the delivery kit

Related products

Download PDF
Download PDF