Дозирующие устройства SL-43

Dosing devices SL-43

For single-line lubrication systems

The SL-43 series metering units are designed for single-line oil and liquid lubrication systems. The unit's flow rate is adjusted externally, and an indicator pin provides visual verification of the unit's operation. These carbon steel metering units are available with fluororubber or acrylonitrile butadiene rubber seals. Metering units with fluororubber seals (distinguished by black adjustment caps) are used in applications requiring heat resistance or lubricant compatibility.

Technical characteristics and advantages

  • Single channel threaded metering device with pre-lubrication cycle is bolted on
  • Suitable for use with mounting panels having one to four channels according to the number of lubrication points
  • The dosing volume is adjusted externally
  • The indicator rod provides visual control of the dosing device operation.
  • Can be used in combination with SL-41, SL-42 and/or SL-44 dosing units
  • Easy dismantling of individual metering devices for inspection or replacement

Application areas

  • Glass recycling
  • Paper recycling
  • Plastic recycling
  • Printing and packaging equipment
  • Metalworking
  • Loading and unloading equipment
Brochures and manuals
 Product catalog (9.9 MB)
Category:

Description

Technical specifications
Operating principle dosing device with preliminary lubrication cycle
Exits 1
Adjustable dosing volume 0.016–0.131 cm³ 0.001–0.008 in³
Lubricant mineral and synthetic oil
Operating temperature from −26 to +93 °C from −15 to +200 °F
Heat resistance max. +176 °C +350 °F
Working pressure min. 52 bar
max 70 bar		 min. 750 psi
max 1000 psi
Relief pressure 10 bar 150 psi
Material carbon steel, stainless steel, brass, steel,
seals made of butadiene acrylonitrile rubber (NBR) or fluororubber (FKM, FPM)
(they are distinguished by black adjustment caps)
(applications requiring heat resistance)
Connection of the main pipeline 1/4 NPTF (F)
Output connection 1/8 tube; connections with an outer diameter of 3.175 mm1)
Dimensions min. 44 × 79 × 52 mm
max 102 × 79 × 52 mm		 min. 1.7 x 3.1 x 2.0 inches
max 4.0 x 3.1 x 2.0 inches
Installation position any
  1. 1)
    Various adapters are available, see accessories
    Note: When using a supply pipe with an outer diameter of 1/8, the length of the supply line should not exceed 7.5 m; 295 inches at oil temperature +18 °C; +65 °F
Ordering information
Part number Designation Number of dosing devices
83661–1 SL-43, standard, with butadiene acrylonitrile rubber seals 1, panel mounting
83661–2 SL-43, standard, with butadiene acrylonitrile rubber seals 2, panel mounting
83661–3 SL-43, standard, with butadiene acrylonitrile rubber seals 3, panel mounting
83661–4 SL-43, standard, with butadiene acrylonitrile rubber seals 4, panel mounting
84429–1 SL-43, heat-resistant, with fluororubber seals 1, panel mounting
84429–2 SL-43, heat-resistant, with fluororubber seals 2, panel mounting
84429–3 SL-43, heat-resistant, with fluororubber seals 3, panel mounting
84429–4 SL-43, heat-resistant, with fluororubber seals 4, panel mounting
Accessories
Part number Description
Replacement for mounting panel injectors
83662 Standard single metering unit/without mounting panel, 1 outlet, 1/8 NPTF (M) inlet connection
83660 dosing device for standard mounting panel
84110 dosing device for heat-resistant mounting panel
Mounting panels 1)
91883–1 1 output channel
91884–1 2 output channels
91885–1 3 output channels
91886–1 4 output channels
G 1/8 adapters for connection to metric fittings
249281 For steel tube ø 4 mm
249279 For stainless steel tube ø 4 mm
249282 For steel tube ø 6 mm
249280 For stainless steel tube ø 6 mm
  1. 1)
    All injectors, with the exception of replacement injectors for mounting panels, come standard with a compression nut and a 1/8" OD pipe fitting. Injectors with mounting panels come standard with two mounting clamps and screws.

Related products