Контроллер EOT-2

EOT-2 Controller

For single-line, multi-line and sequential lubrication systems

The EOT-1 controller features a fixed 4-second run time and flexible pause time adjustment, making it suitable for chain lubrication. The EOT-2 controller offers flexible time settings. Both of these controllers are necessary if lubrication systems use pumps without a timer or if the customer does not have pumps with a built-in controller. They are also suitable for retrofitting equipment. The run time is set using the red (run time) and blue (pause time) switches, and a pushbutton is used to activate an additional lubrication cycle, making the pump simple and safe to operate.

Technical characteristics and advantages

  • Easy-to-use controller for indoor and outdoor installations
  • Suitable for equipment upgrades
  • Easy time setting and function control

Application areas

  • Lubrication pumps without built-in controller
  • Agricultural machinery, chain lubrication systems
  • Simple lubrication systems in mechanical devices
  • When combined with an electric motor relay assembly, it is ideal for multi-line pumping units.
Documentation
Category:

Description

Technical specifications
Operating principle control and monitoring device
Operating temperature from -25 to +70 °C from -13 to +158 °F
Supply voltage 12 or 24 V DC current
Current consumption max ≤ 7 A
Noise reduction Class A VDE 0875 T11
Noise immunity DIN EN 61000-6-1
Short-term radiation DIN EN 61000-6-3
Exits transistor/normally open
EEPROM non-dissipative data storage
Pause time EOT1: min. 5 seconds, max. 75 minutes (factory setting: 15 seconds)
EOT2: min. 4 minutes, max. 15 hours (factory setting: 6 hours)
Opening hours EOT1: 4 seconds, does not change (factory settings - 4 seconds)
EOT2: min. 8 seconds / max. 30 minutes (factory setting: 6 minutes)
Standard CE
Protection class IP 65, SELV/PELV
Dimensions 122 × 118 × 56 mm 4.80 x 4.65 x 2.00 inches
Installation position any
Ordering information
Article Description
664-34135-6 1)  EOT-1 controller, fixed operating time, flexible pause time adjustment
664-34135-7 1)  EOT-2 controller, flexible time settings
236-10980-2 0.6A motor starter, 24VDC
236-10980-3 1.0A 24VDC motor starter
236-10980-4 1.6A 24VDC motor starter
236-10980-5 4.0A 24VDC motor starter
  1. 1)
    Pumps with three-phase electric motors must be equipped with starters to operate with this control unit.

Related products