Переключатель давления 24733
Переключатель давления 24733 - Image 2

Pressure switch 24733

For single-line lubrication systems

The 24733 analog pressure sensor reports actual system pressure to the controller for monitoring. It can be installed at the end of single-line metering unit mounting panels or using adapters. It comes with a 1.8 m shielded connecting cable. (72 inches) with a 24 gauge. The maximum length of the wire between the sensor and the monitoring device is 9.1 m (30 feet).

Technical characteristics and advantages

  • The analog pressure sensor transmits the actual pressure in the system from 0 to 276 bar (0 to 4000 psi)
  • Complete unit with 1.8m shielded connecting cable (72 inches) with a 24 gauge
  • Installation of single-line metering devices at the end of mounting panels or using adapters is possible.
  • Durable and easy to use product
  • An economical alternative to expensive sensors

Application areas

  • Metalworking
  • Loading and unloading equipment
  • Off-road equipment
  • Mobile equipment
  • Food industry

Documentation

 Product brochure (9.9 MB)
Category:

Description

Technical specifications
Operating principle analog pressure sensor
Lubricant oil and liquid lubricant: NLGI 000, 00, 0
plastic grease: NLGI 1, 2
Operating temperature from −29 to +82 °C from −20 to +180 °F
Working pressure max 515 bar max 7500 psi
Switching pressure 0–275 bar 0–4000 psi
Error ±1 %
Input voltage 10–30 VDC
Output voltage 1-6 VDC
Bias 1 VDC
Frame NEMA 4X protection class
Electrical connection 24 AWG 360° with PVC shield
UL approved
Pressure tapping hole 1/4 NPT (male thread)
Material stainless steel
Protection class IP 65
Dimensions 16 × 76.2 mm 0.625 x 3000 inches
Installation position any
Ordering information
Part number Description
247333 analog pressure sensor

Related products