Loading device type NZO 600 C

Loading device type NZO 600 C

The NZO600C open-type cascade telescopic loader is designed for loading bulk, powdery and grain materials into open flatbed vehicles, delivering bulk materials to open storage areas, and loading ships and vessels.

Technical specifications:

• productivity: 700 m³/h;
• fraction of loaded material: 0 - 30 mm.;
• connection diameter: DN 600 mm.;
• transport arch consisting of internal cascade cones and external elastic corrugation;
• design dimensions: developed according to the customer’s required dimensions;
• standard operating temperature range: - 40 + 80 ºС.

Execution:

• the upper (frame) part is a supporting component on which an electric drive with a gearbox, a system for guiding and sagging cables, and limit switches with built-in and adjustable position sensors are installed;
• The middle section—the transport arch—is designed to transport and direct the loaded material. It consists of a system of inclined cones that limit the material flow rate. The cone's shape holds the loaded material in place, preventing the separation of large particles, eliminating material segregation and degradation.;
• The lower section is a dust-proof bell, equipped with rubber-fabric plates that form a "skirt" that is in continuous contact with the loaded material and prevents dust from escaping from beneath the loader. The dust-proof bell is equipped with material level sensors that ensure the gradual lifting of the telescopic loader while maintaining constant contact with the bulk material pile.

Distinguishing characteristics:

• Dust-free loading is ensured by a dust-proof bell, which is in continuous contact with the loaded material;
• equipping the loading device with material level sensors that ensure gradual lifting of the telescopic loader while maintaining constant contact with the bulk pile of material;
• automatic, gradual lifting of the loading device bell, provided by an electric winch and STOP&GO system;
• variable material execution of internal and external transport arches (black steel, stainless steel, abrasive-resistant HARDOX), dust-proof corrugations with temperature resistance of -40 °C/+250 °C;
• reliable three-cable design of the transport arch, eliminating skewing and, as a result, collapse of the telescopic loader;
• Thanks to the special shape of the cones of the internal transport vault, which ensure a slow flow of the entire mass of material, the formation of dust at the source is eliminated, and there is no need to use expensive, energy-intensive dust removal and filtration systems;
• The telescopic loader can reduce dust emission levels to 5 mg/m³.

Additional equipment:

• control cabinet/pendant control panel/remote wireless control panel;
• slide gate valves (manual, electric, pneumatic);
• variable material execution of the transport arch: stainless steel, abrasive-resistant HARDOX;
• lining of transport arch: Vautid, HARDOX, CDP (CastoDur Diamond Plates);
• explosion-proof / food-safe design;
• adapters of the required size for the Customer's flange;
• operating temperature range: - 40 ºС + 250 ºС.

This equipment is manufactured to meet the specific needs of the Customer, special operating conditions, and the required dimensions and performance!

The given dimensions are for informational purposes only.

In each specific case of application, the overall dimensions and technical characteristics will be individual.