{"id":6567,"date":"2025-02-11T14:37:11","date_gmt":"2025-02-11T11:37:11","guid":{"rendered":"https:\/\/titan.ziz.kz\/?post_type=product&p=6567"},"modified":"2025-08-07T15:12:36","modified_gmt":"2025-08-07T12:12:36","slug":"smesitelnye-klapany-169-000-18x-25x","status":"publish","type":"product","link":"https:\/\/tpgt.kz\/en\/product\/smesitelnye-klapany-169-000-18x-25x\/","title":{"rendered":"Mixing valves 169-000-18x \/ -25x"},"content":{"rendered":"
\n
\n
\n
\n
\n
\n
\n
\n
\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n
Technical specifications<\/caption>\n
Operating principle<\/td>\nFlow divider<\/td>\n<\/tr>\n
Exits<\/td>\n1<\/td>\n<\/tr>\n
Lubricant<\/td>\nMineral or synthetic oil compatible with NBR rubber<\/td>\n<\/tr>\n
Viscosity<\/td>\nmax 3000 mm2<\/sup>\/With<\/td>\n<\/tr>\n
Response pressure, air<\/td>\nmax 10 bar<\/td>\nmax 145 psi<\/em><\/td>\n<\/tr>\n
Response pressure, oil<\/td>\nmax 5 bar<\/td>\nmax 73 psi<\/em><\/td>\n<\/tr>\n
Air inlet connection<\/td>\n169-000-183: M8x1
\n169-000-253: M10x1<\/td>\n<\/tr>\n
Oil inlet connection<\/td>\nM8x1<\/td>\n<\/tr>\n
Dimensions<\/td>\n169-000-183: 128 x \u220536 mm
\n169-000-253: 139.5 x 41 mm<\/td>\n		5 x \u22051.41 inches
\n<\/em>5.5 x 1.6 inches<\/em><\/td>\n<\/tr>\n
Installation position<\/td>\nvertical<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Ordering information<\/caption>\n
Part number<\/strong><\/td>\nNumber of outputs<\/strong><\/td>\n<\/tr>\n
169-000-182<\/strong><\/td>\n2<\/td>\n<\/tr>\n
169-000-183<\/strong><\/td>\n3<\/td>\n<\/tr>\n
169-000-184<\/strong><\/td>\n4<\/td>\n<\/tr>\n
169-000-185<\/strong><\/td>\n5<\/td>\n<\/tr>\n
169-000-186<\/strong><\/td>\n6<\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
169-000-252<\/strong><\/td>\n2<\/td>\n<\/tr>\n
169-000-253<\/strong><\/td>\n3<\/td>\n<\/tr>\n
169-000-254<\/strong><\/td>\n4<\/td>\n<\/tr>\n
169-000-255<\/strong><\/td>\n5<\/td>\n<\/tr>\n
169-000-256<\/strong><\/td>\n6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>","protected":false},"excerpt":{"rendered":"

For use in oil-air lubrication systems<\/span><\/h1>\n
\n
\n
\n

Flow dividers distribute oil-air flows between 2\u20136 lubrication points. For the most uniform distribution of oil-air flow, there should be no back pressure at the oil-air flow divider outlets. Furthermore, the length of the secondary lines at the flow divider outlets should not differ by more than 0.5 m. If the length of the secondary lines at the flow divider outlets differs by more than 0.5 m, a secondary flow divider must be used.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\n
\n
\n
\n

Application<\/p>\n