{"id":6411,"date":"2025-02-11T12:14:28","date_gmt":"2025-02-11T09:14:28","guid":{"rendered":"https:\/\/titan.ziz.kz\/?post_type=product&p=6411"},"modified":"2025-08-13T15:32:51","modified_gmt":"2025-08-13T12:32:51","slug":"dozirujushhie-ustrojstva-slc","status":"publish","type":"product","link":"https:\/\/tpgt.kz\/en\/product\/dozirujushhie-ustrojstva-slc\/","title":{"rendered":"SLC dosing devices"},"content":{"rendered":"
\n
\n
\n
\n
\n
\n
\n
\n
\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n
Similar characteristics of SLC1 and SLC2<\/caption>\n
Operating principle<\/td>\nSingle-line metering device with spring-loaded control piston and double-acting feed pistons<\/td>\n<\/tr>\n
Lubricant<\/td>\nPlastic lubricants up to and including NLGI consistency class 2<\/td>\n<\/tr>\n
Operating temperature<\/td>\nfrom \u221240 to +100 \u00b0C<\/td>\nfrom \u221240 to +212 \u00b0F<\/em><\/td>\n<\/tr>\n
Systemic pressure<\/td>\n150\u2013315 bar<\/td>\n2150\u20134600 psi<\/em><\/td>\n<\/tr>\n
Relief\/bleed pressure<\/td>\nmax 68 bar<\/td>\nmax 990 psi<\/em><\/td>\n<\/tr>\n
Lubricant inlet connection<\/td>\nG3\/8 or 3\/8\u2033 NPTF<\/td>\n<\/tr>\n
Inlet fittings for tubes with an outside diameter<\/td>\n8, 10, 12 mm or 1\/4, 3\/8, 1\/2 inch<\/td>\n<\/tr>\n
Material<\/td>\nSteel<\/td>\n<\/tr>\n
Corrosion resistance category (DIN EN ISO 12944)<\/td>\nC3<\/td>\n<\/tr>\n
Installation position<\/td>\nany, preferably vertical<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n
\n\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n
Differences<\/caption>\n
<\/td>\nSLC1<\/th>\nSLC2<\/th>\n<\/tr>\n
Number of lubricant outlets<\/td>\n1\u201312<\/td>\n1\u20136<\/td>\n<\/tr>\n
Feed volume for output\/per feed stroke<\/td>\n<\/tr>\n
It is set in advance<\/td>\n0,1; 0,15; 0,2;
\n0,25; 0,3; 0,4;
\n0.5; 0.6; 0.7 cm\u00b3<\/td>\n		0,0061; 0,0091; 0,012;
\n0,015; 0,018; 0,024;
\n0.03; 0.036; 0.043 in\u00b3<\/em><\/td>\n		0,2; 0,3; 0,4;
\n0,5; 0,6; 0,8;
\n1.0; 1.2; 1.4 cm\u00b3<\/td>\n		0,012; 0,018; 0,024;
\n0,03; 0,036; 0,049;
\n0.06; 0.073; 0.085 in\u00b3<\/em><\/td>\n<\/tr>\n
Regulated<\/td>\n0.1\u20130.7 cm\u00b3<\/td>\n0.0061\u20130.043 in\u00b3<\/em><\/td>\n0.2\u20131.4 cm\u00b3<\/td>\n0.012\u20130.085 in\u00b3<\/em><\/td>\n<\/tr>\n
Lubricant outlet connection<\/td>\n6 mm<\/td>\nOutside diameter 1\/4 inch<\/em><\/td>\n6, 8, 10, 12 mm<\/td>\nOutside diameter 1\/4, 3\/8 or 1\/2 inch<\/em><\/td>\n<\/tr>\n
Exit thread<\/td>\n<\/td>\n<\/td>\nG1\/4 or 1\/4\u2033 NPTF<\/td>\n<\/td>\n<\/tr>\n
Dimensions<\/td>\nBasic version with 12 outputs<\/td>\nBasic version with 6 outputs<\/td>\n<\/tr>\n
<\/td>\n144 \u00d7 135 \u00d7 50 mm<\/td>\n5.67 x 5.31 x 1.97 inches<\/em><\/td>\n169 \u00d7 132 \u00d7 40 mm<\/td>\n6.65 x 5.2 x 1.57 inches<\/em><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n
\n\n\n\n\n<\/colgroup>\n\n\n\n\n
Visual memory indicators<\/caption>\n
Operating principle<\/td>\nMagnetic reset indicator with red failure indicator ring and plastic protective cap<\/td>\n<\/tr>\n
Material<\/td>\nStainless steel<\/td>\n<\/tr>\n
Operating temperature<\/td>\nfrom \u221220 to +70 \u00b0C<\/td>\nfrom -4 to +158 \u00b0F<\/em><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n
\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n
Electronic parameter indicators<\/caption>\n
Operating principle<\/td>\nElectronic piston sensor<\/td>\n<\/tr>\n
Material<\/td>\nStainless steel<\/td>\n<\/tr>\n
Corrosion resistance category (DIN EN ISO 12944)<\/td>\nC5<\/td>\n<\/tr>\n
Operating temperature<\/td>\nfrom \u221240 to +85 \u00b0C\u00a0(from -40 to +185 \u00b0F)<\/em><\/td>\n<\/tr>\n
Type<\/td>\n3-wire DC PNP; 2-wire DC PNP\/NPN<\/td>\n<\/tr>\n
Exit function<\/td>\nNormally open contact<\/td>\n<\/tr>\n
Operating voltage<\/td>\n10-36 VDC, cULus Class 2 power supply<\/td>\n<\/tr>\n
Protection class<\/td>\nIP65<\/td>\n<\/tr>\n
Energy consumption<\/td>\nmax 5 mA<\/td>\n<\/tr>\n
Compound<\/td>\nM12x1, four-pin connector<\/td>\n<\/tr>\n
Standard<\/td>\nCE, UL, CSA, E1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n\n\n\n<\/colgroup>\n\n\n\n\n
Sample order<\/caption>\n
The product can be configured using a configuration code. The order template includes the applicable part number and an explanation.<\/td>\n<\/tr>\n
SLC1G3B-1RGBBR-EXM<\/strong><\/td>\n\n
    \n
  • SLC dosing device<\/li>\n
  • Construction size 1<\/li>\n
  • BSP thread for metric pipes<\/li>\n
  • Corrosion load category C3<\/li>\n
  • With 4 fixed metering screws and 2 adjustment screws on top, and 6 visual indicators on the bottom<\/li>\n
  • Number of sections:
    \n6, dosing volume per feeding stroke, total 11 outputs<\/p>\n
      \n
    • Segment 1: 0.2 cm\u00b3\u00a0(0.012 in\u00b3)<\/em>\u00a0(connection of outputs 2\u00d70.1 cm\u00b3\u00a0(2\u00d70.0061 in\u00b3)\u00a0<\/em><\/li>\n
    • Segment 2: 0.1\u20130.7 cm\u00b3\u00a0(0.0061\u20130.043 in\u00b3)\u00a0<\/em><\/li>\n
    • Segment 3: 0.4 cm\u00b3\u00a0(0.024 in\u00b3)<\/em><\/li>\n
    • Segment 4: 0.1 cm\u00b3\u00a0(0.0061 in\u00b3)<\/em><\/li>\n
    • Segment 5: 0.1 cm\u00b3\u00a0(0.0061 in\u00b3)<\/em><\/li>\n
    • Segment 6: 0.1\u20130.7 cm\u00b3\u00a0(0.0061\u20130.043 in\u00b3)<\/em><\/li>\n<\/ul>\n<\/li>\n
    • Lubricant inlet connection left: straight fitting for \u00d810 mm tubing, connection to EO2<\/li>\n
    • Lubricant inlet connection on the right: closed<\/li>\n
    • Lubricant outlet connection: 11 x 6mm OD tubes, push-in type (5 x extension outlets)<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
You can configure your product using the CAD configurator below. This will provide you with a specific order number.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n

Configure the product, download the CAD file<\/p>\n