{"id":6021,"date":"2025-02-10T13:50:21","date_gmt":"2025-02-10T10:50:21","guid":{"rendered":"https:\/\/titan.ziz.kz\/?post_type=product&p=6021"},"modified":"2025-08-04T14:12:52","modified_gmt":"2025-08-04T11:12:52","slug":"agregat-dlja-maslovozdushnogo-smazyvanija-ola","status":"publish","type":"product","link":"https:\/\/tpgt.kz\/en\/product\/agregat-dlja-maslovozdushnogo-smazyvanija-ola\/","title":{"rendered":"OLA oil-air lubrication unit"},"content":{"rendered":"
\n
\n
\n
\n
\n
\n
\n
\n
\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Technical characteristics of pumps<\/caption>\n
Operating principle<\/td>\nOil-air lubrication unit with compact gear pump unit and mixing valve<\/td>\n<\/tr>\n
MFL gear pump unit<\/strong><\/td>\n<\/tr>\n
Lubricant<\/td>\nMineral or synthetic oil compatible with butadiene acrylonitrile rubber, viscosity from 20 to 1000 mm\u00b2\/s (cSt)<\/td>\n<\/tr>\n
Feed volume<\/td>\n0.2 l\/min<\/td>\n0.05 gallons\/min<\/em><\/td>\n<\/tr>\n
Number of outputs<\/td>\n1\u20138<\/td>\n<\/td>\n<\/tr>\n
Working pressure<\/td>\n30 bar<\/td>\n435 psi<\/em><\/td>\n<\/tr>\n
Ambient temperature<\/td>\nfrom +10 to +40 \u00b0C<\/td>\nfrom +50 to +104 \u00b0F<\/em><\/td>\n<\/tr>\n
Supply voltage<\/td>\n115\/230 VAC; 24 VDC<\/td>\n<\/tr>\n
Rated current at 50 Hz<\/td>\n1.06\/0.53 A<\/td>\n<\/tr>\n
Rated current at 60 Hz<\/td>\n1.36\/0.68 A<\/td>\n<\/tr>\n
Nominal current at 24VDC<\/td>\n1.6 A<\/td>\n<\/tr>\n
Power at 50 Hz<\/td>\n60 W<\/td>\n<\/tr>\n
Power at 60 Hz<\/td>\n75 W<\/td>\n<\/tr>\n
Power at 24VDC<\/td>\n39 W<\/td>\n<\/tr>\n
Capacity of a plastic tank<\/td>\n3 l<\/td>\n<\/tr>\n
Tank material<\/td>\nPolyamide (PA6)<\/td>\n<\/tr>\n
Protection class<\/td>\nIP 54<\/td>\n<\/tr>\n
Pressure relief valve<\/td>\nincluded in the kit<\/td>\n<\/tr>\n
Thermal switch<\/td>\nincluded in the kit<\/td>\n<\/tr>\n
Operating mode (according to VDE 0530)<\/td>\nStandard design: S3, working time 20 % (from 1.25 to 25 min)<\/td>\n<\/tr>\n
Installation position<\/td>\nvertical<\/td>\n<\/tr>\n
Oil pressure switch\u00a0<\/strong>(part of the gear pump unit)<\/td>\n<\/tr>\n
Operating principle<\/td>\nNormally open contact<\/td>\n<\/tr>\n
Switching voltage range<\/td>\n10-25 VAC; 10-36 VAC<\/td>\n<\/tr>\n
Switching current (resistive load)<\/td>\n\u2264 1 A<\/td>\n<\/tr>\n
Switching capacity (resistive load)<\/td>\n\u2264 10 W<\/td>\n<\/tr>\n
Nominal pressure<\/td>\n20 bar<\/td>\n290 psi<\/em><\/td>\n<\/tr>\n
Lubricant level sensor\u00a0<\/strong>(part of the gear pump unit)<\/td>\n<\/tr>\n
Operating principle<\/td>\nNormally closed contact (opens when the filling level is too low)<\/td>\n<\/tr>\n
Switching voltage range<\/td>\n10-25 VAC; 10-36 VAC<\/td>\n<\/tr>\n
Switching current (resistive load)<\/td>\n\u2264 0.25 A<\/td>\n<\/tr>\n
Switching capacity (resistive load)<\/td>\n\u2264 3 W<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Specifications - Options<\/caption>\n
Control unit<\/strong><\/td>\n<\/tr>\n
Type<\/td>\nIG54-20-S4-I<\/td>\n<\/tr>\n
Supply voltage<\/td>\n115\/230 VAC (50\/60 Hz) selectable; 24 VDC<\/td>\n<\/tr>\n
Pump duty cycle limitation<\/td>\n60 sec (not adjustable)<\/td>\n<\/tr>\n
Time interval<\/td>\n10 min (adjustable from 1 to 99 min)<\/td>\n<\/tr>\n
Pump stop delay time<\/td>\n5 sec (adjustable from 1 to 99 sec)<\/td>\n<\/tr>\n
Pre-lubrication cycles<\/td>\n10 (adjustable from 0 to 99 cycles)<\/td>\n<\/tr>\n
Minimum air pressure switch<\/strong><\/td>\n<\/tr>\n
Operating principle<\/td>\nNormally closed contact \/ normally open contact (depending on the wiring diagram)<\/td>\n<\/tr>\n
Switching pressure<\/td>\n0.5\u20135 bar (preset 3 bar)<\/td>\n7.25\u201372.5 psi (preset 43.5 psi)<\/em><\/td>\n<\/tr>\n
Max. switching voltage<\/td>\n250 V<\/td>\n<\/tr>\n
Max. switching current<\/td>\n5 A<\/td>\n<\/tr>\n
Reset differential<\/td>\nAbout 15 %<\/td>\n<\/tr>\n
3\/2-way directional control pneumatic valve<\/strong><\/td>\n<\/tr>\n
Switching voltage<\/td>\n120V AC, 60Hz; 230V AC, 50Hz; 24V DC<\/td>\n<\/tr>\n
Switching capacity<\/td>\n4 W<\/td>\n<\/tr>\n
Plug connector<\/td>\nDIN EN 175301-803-C<\/td>\n<\/tr>\n
Pressure range<\/td>\n0\u201310 bar<\/td>\n0\u2013145 psi<\/em><\/td>\n<\/tr>\n
Pneumatic control valve<\/strong><\/td>\n<\/tr>\n
Type<\/td>\nDiaphragm regulator<\/td>\n<\/tr>\n
Max. primary pressure<\/td>\n0\u201316 bar<\/td>\n0\u2013232 psi<\/em><\/td>\n<\/tr>\n
Secondary pressure<\/td>\n0.5\u201310 bar<\/td>\n7.25\u2013145 psi<\/em><\/td>\n<\/tr>\n
Seal material<\/td>\nNBR<\/td>\n<\/tr>\n
Pneumatic control valve including filter and moisture separator<\/strong><\/td>\n<\/tr>\n
Filter mesh<\/td>\n5 microns<\/td>\n<\/tr>\n
Water separation<\/td>\nsemi-automatic<\/td>\n<\/tr>\n
Oil filter<\/strong><\/td>\n<\/tr>\n
Filter mesh<\/td>\n3 \u00b5m or 10 \u00b5m<\/td>\n<\/tr>\n
Contamination retention<\/td>\n6.3 g at \u2206p = 5 bar (3 \u00b5m)
\n5.2 g at \u2206p = 5 bar (10 \u00b5m)<\/td>\n<\/tr>\n
Oil contamination level indicator<\/strong><\/td>\n<\/tr>\n
Operating principle<\/td>\nNormally closed contact = alarm 100 %
\nNormally open contact = warning signal 75 %<\/td>\n<\/tr>\n
Max. switching voltage<\/td>\n24 V AC\/DC<\/td>\n<\/tr>\n
Max. switching capacity<\/td>\n15 W<\/td>\n<\/tr>\n
Breaking capacity (resistive load)<\/td>\n1 A (at 15 V AC\/DC)<\/td>\n<\/tr>\n
Opening pressure<\/td>\n\u22065 bar \u201310 %<\/td>\n\u220672.5 lb\/in\u00b2 \u201310 %<\/em><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n
\n
\n
\n
\n\n\n\n<\/colgroup>\n\n\n\n\n
Sample order<\/caption>\n
The product can be configured using a configuration code. The order template includes the applicable part number and an explanation.<\/td>\n<\/tr>\n
OLA1-1E0XA30000000<\/strong><\/td>\n\n
    \n
  • OLA series products<\/li>\n
  • One dosing point<\/li>\n
  • Without control unit, 230 V AC<\/li>\n
  • Without air filter, without valve<\/li>\n
  • Without oil filter<\/li>\n
  • Without switch for minimum air pressure<\/li>\n
  • Dosing volume 0.03 cm3<\/sup>\/cycle<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
You can configure your product using the CAD configurator below. This will provide you with a specific order number. More detailed information is available in the product catalog.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n
\n
\n
\n
\n
\n

Configure the product, download the CAD file<\/p>\n